|
PIC12F675 8-PIN PONG
Related electronic circuits:
Using PicBasic with the PIC16F84 PIC Microcontroller. Creating & Using Asynchronous Serial Solutions: How to build your own 12-Pin I/O-expander using the PIC16F84 and PicBasic. This project will control up to 12 individual relays through a serial connection to your PC or other asynchronous serial interface.
How to Build a 10-Key Serial Keypad. Creating & Using Asynchronous Serial Solutions: How to create your own "Serial Keypads". This project uses PicBasic Pro, and the PIC16C620A microcontroller to build a 10-key serial keypad. The PIC16C620A only costs $2.50 each in single quantities, and the keys are simple normally-open, push-button switches. Build a user input keypad for your next basic stamp or PIC design and use a single I/O-pin for the interface.
Controlling Hobby Servo Motors: How to build your own addressable serial servo controllers using the 8-pin PIC12C671. Control a ton of servo motors with a single I/O-pin, and ad the ability to move many servos at the exact same time with one serial command line.
PicBasic Experiments With The PIC16F877. Analog to Digital & Using The 8-Pin PIC: Using the PIC16F877 A/D Converter. This example displays 3-channels of analog input on an LCD display.
8-Pin, 8-Bit CMOS Microcontroller with A/D Converter. Analog to Digital & Using The 8-Pin PIC: Using the 8-Pin PIC12C671 with PicBasic.
Using the Onboard 8-Bit A/D Converter of the PIC12C67X. Analog to Digital & Using The 8-Pin PIC:
Designing a 4-Channel A/D Application with the PIC12C671. Analog to Digital & Using The 8-Pin PIC: How to build a 4-channel A/D converter using the PIC12C671. This application is excellent for building robotic guidance systems using light to control robotic behavior, serial volt-meters, hobby servo positioning systems, using arrays with PicBasic, you name it...! Lots of possibilities with this project.
"Serial Relay Controller" with the PIC12C671. Analog to Digital & Using The 8-Pin PIC: Designing a simple I/O expander or serial relay controller using the inexpensive, 8-pin, PIC12C671.
Cable- Panasonic Interface GD-90. Connector Pin-Out.
Nokia FBus cable: For the special DAU-4S cable (DAU for MBUS): put the RX and TX data lines from the MAX 232 IC together to the MBUS pin of the Nokia connector.
ATTENTION! PIC12F675 8-PIN PONG
, as all other schemes are located on the sites of their rightful owners. We are not liable for the contents of other sites as well as the site having a circuit PIC12F675 8-PIN PONG
. Pressing the button you must get onto a page with PIC12F675 8-PIN PONG
. |
|
|